The Single Remote Fresh Water Flushing System allows the main engine or auxiliary equipment such as gen set, air conditioner or hydraulic oil heat exchanger to be flushed with out the need to enter the engine room. This is achieved by installing the Inlet Basin on the or around the open rear area of the vessel to attach the fresh water hose from the marina and pass the water to the valve installed in the appropriate area for the equipment to be flushed. This system is great for those hard and hot access areas and allows all heat exchangers of the equipment to be flushed with ease.
This system can also allow the injection of CFS (Clean Flush Soak) Descaler Concentrate to the raw water side of the cooling system to remove the scale and salt build up without the removal of the heat exchangers.
CFS can remain in the system for up to 24 hours without any destructive effects to any of the substrates or parent materials.
When using the CFS it is highly recommended and required to remove the zinc anodes from the raw water cooling side as the zinc anodes will be destroyed. However the anodes should be replaced into the system on completion of a clean.
Once the system is cleaned the zinc anodes should last up to two years as long as fresh water is placed in the cooling raw water system to remove the salt water while the engine(s) of vessel is not in use.
1 x Auto Valve with tube*, plus single port Inlet Basin with cover & 2 labels: MOTOR, GEN-SET