Description
Heat exchanger cleaning, descaling and removal of calcium buildup on the raw water side without heat exchanger removal.
CFS can be safely used to clean out the inside of the latest model 4 stroke outboards due to the food grade inhibitors for the protection of various alloys.
CFS is a descaling product which will remove calcium, barnacles, rust and scale build up from the inside of marine engine heat exchangers and will not damage the parent material. CFS comes in a concentrated form for ease of transport, storage and will make up 25ltrs (4:1 ratio) of strong usable chemical cleaner from a 5ltr container of concentrate. CFS can also be purchased in 5ltr, 20 and 205ltr drums.
The maintenance of marine engine heat exchangers is greatly enhances due to the fact CFS can remain in the raw water cooling system for up to but not including a period of 24 hours without causing major parent material removal and to assist in the heat exchanger core removal for major servicing without the use of excessive force or other dangerous forms of removal.
CFS can also be used to clean the fresh water side of motors to ensure there is maximum cooling during engine use. This will remove any rust build up due to air pockets and insufficient coolant additive’s. Ratio for this is 10:1. Engines need to be run and heated up to approx. 70 degrees Celsius for 5 minutes, shut down for approx. 10 minutes. This procedure should be carried out approx. 3 times for complete cleaning. NOTE during this procedure the radiator cap should not be installed in its usual place to allow any gasses to escape. On completion, drain out block content and replace with engine manufacturers recommended coolant.
Other uses for CFS is in boilers, cooling towers, condensers, chillers, compressors, pumps, piping, radiators, water makers, evaporators, strainers, also suitable as a sanitation agent in the dairy, food and brewing industries.
CFS has been specifically designed for the latest technologies in many industries as a workplace safe product and EPA friendly. CFS IS A PROUDLY AUSTRALIAN MADE PRODUCT.
CFS can be administered into the raw water system of marine motors etc via the use of our CAD (chemical adding device).
Freight charges will vary from state to state as product is a Dangerous Goods. Contact Adit Marine for appropriate priced.
| MIXTURE RATIOS: 4:1 steels, stainless, titanium, bronze
6:1 aluminium 8:1 traces of magnesium 10:1 heated 17:1 ultrasonic bath
|
